SD Exposer

Requirements

• M4 or M0 board
• Adalogger featherwing

Overview

This sketch exposes the onboard SD card as an external storage device to whatever computer the microcontroller is hooked up to.

Slightly modified from the Arduino example msc_sdfat.ino.

NOTE

• Follows standard config.h format.
• Requires the TinyUSB USB stack.

Config Values

Entry	Note
SD_CS_PIN	Chip Select pin. 10 for M4 and 4 for M0
SPI_CLOCK_MHZ	SPI clock speed. 50 max for M4 and 12 max for M0
SPI_CLOCK	Leave as-is. Not configurable.
SD_CONFIG	Leave as-is. Not configurable.